AGFA DuoScan f40 - Manual (Page 7)

Chapter 1: Preparing the Scanner 7
Locking the Scanner
If you need to transport the scanner over long distances, you should first lock your scanner. This
will protect the scanner's optical assembly from possible damage.
1 Switch on your scanner.
The scanner’s optical assembly moves to its home position.
2 When the busy indicators stop blinking, pull the scanner carefully over the edge of the table
until you can see the unlocking screw at the bottom of the scanner.
3 Take a coin and turn the screw a quarter clockwise.
The screw is tightened: your scanner is locked.
4 Move the scanner back on your desktop.
5 Switch off your scanner.
Your scanner is now ready for transportation.