Sony HDR-CX12 - Manual (Page 75)

Customizing your camcorder
5
GENERAL SET
(Other setup items)
Touch , then .
If the item is not on the screen, touch /
to change the page.
How to set
(HOME) menu  page 59
(OPTION) menu  page 76
The default settings are marked with .
DEMO MODE
The default setting is [ON], allowing you
to view the demonstration in about 10
minutes, after you turn the POWER switch
to (Movie).
Tips

The demonstration will be suspended in the
following situations.

When you press START/STOP or PHOTO

When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes)

When you turn the POWER switch to
(Still)

When you press (HOME) or (VIEW
IMAGES)
REC LAMP (Recording lamp)
The camera recording lamp on the front
of your camcorder lights up, as the default
setting is [ON].
CALIBRATION
See page 101.

A.SHUT OFF (Auto shut off)
 5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
Notes

When you connect your camcorder to a
wall outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
QUICK ON STBY (Quick on
standby)
You can set the desired turn off time of the
camcorder with [QUICK ON STBY] while
the Sleep mode is set (p. 28). The default
setting is [10min].
Notes

While the Sleep mode is set, the setting of
[A.SHUT OFF] becomes ineffective.
REMOTE CTRL (Remote
control)
The default setting is [ON], allowing you
to use the supplied Remote Commander
(p. 108).
Tips

Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
CTRL FOR HDMI (Control for
HDMI)
The default setting is [ON], allowing you to
do the playback operation with the remote
commander of your TV by connecting your
camcorder to a “BRAVIA” Sync compatible
TV with the HDMI cable (optional) (p. 41).


