Movie recording, Adjusted, Movie (153) – Sony SLT-A99V User Manual
Page 153
153
Movie recording setup
Mov
ie rec
ording s
etup
conditions. Selecting manual focus and adjusting the shutter speed or aperture may
make the movement smoother (page 101).
• A value for the ISO sensitivity between ISO 100 and ISO 6400 can be selected when
you record movies. If you start movie recording with a value of ISO 6400 or larger
selected, the ISO sensitivity is switched to ISO 6400. If you start movie recording
with a value of ISO 100 or smaller selected, the ISO sensitivity is switched to ISO
100. When you finish recording your movie, the ISO sensitivity setting is returned to
the previous value.
• When ISO is set to [Multi Frame Noise Reduct.], [AUTO] is temporarily selected.
• You cannot select [Soft Focus], [HDR Painting], [Rich-tone Mono.], or [Miniature]
in Picture Effect. When movie recording starts, Picture Effect is temporarily set to
[Off].
When you record fast moving subjects, select [High], and when several
subjects are moving or crossing back and forth, select [Low].
MENU button t
1
t [AF Tracking Duration] t Select the
desired setting
You can record movies with the shutter speed and aperture adjusted,
controlling the background defocus or fluidity as intended.
Changing the tracking sensitivity of autofocus during
movie recording
Recording movies with the shutter speed and aperture
adjusted
1
Fn button t
(Focus
Mode)
t
(Manual
Focus)
2
Set the mode dial to
(Movie) (page 68).
• To change the mode, press the Fn button, then select another mode.
3
Adjust the shutter speed and aperture value with the front or
rear control dial.
• When [Shutter speed] or [Aperture] is assigned to the silent multi-
controller, adjustment is also available with the silent multi-controller
(page 32).