Sony MEX-DV1700U - Manual (Page 27)

27
The options are indicated below.
STEREO (ST) : Standard stereo sound
(default)
1/L (L)
: Left channel sound (monaural)
2/R (R) : Right channel sound (monaural)
1
During playback, press

repeatedly until the desired audio
channel appears.
E.g., when playing an MP3
Note
You may not be able to change the audio setting
depending on the disc.
Tip
You can also change the settings of video discs by
selecting “AUDIO” in the play mode menu
(page 24).
Checking the program format
You can check the number of channels and
component position on the DVD VIDEO
being played.
1
During playback, press
.
The play mode menu appears.
2
Press
/ to select
(AUDIO).
The program format appears.
* “PCM,” “DOLBY DIGITAL,” etc., appears
depending on the disc.
The letters in the program format display
represent the following sound components
and its position.
: Front (left)
: Front (right)
: Center
: Rear (left)
: Rear (right)
: Rear (monaural): The rear component
of the Dolby Surround processed signal and
the Dolby Digital signal
: Low Frequency Effect signal
The program format name and channel
numbers appear as follow.
Example: Dolby Digital 5.1 ch
To hide the play mode menu, press
.
Adjusting the audio output
level — DVD level
You can adjust the audio output level for a
DVD recorded in Dolby Digital format, to
reduce the volume level differences between
disc and source.
TRACK NAME
ALBUM NAME
ARTIST NAME MP3
0003/1000 ST
3:17 SHUF
Audio channel
PLAY
DVD VIDEO
L C
LFE
LS
R
RS
12(67)
018(034)
T 1:35:55
1:ENGLISH Dolby D PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
Current program format
Current audio format *
DOLBY DIGITAL 3 / 2 . 1
Rear component × 2
Front component × 2 +
Center component × 1 LFE component Ч 1