Step 3: charging the battery pack (continued), Using an outside power source, Playing time – Sony HDR-FX7 User Manual

Page 20

Advertising
background image

20

Playing time

Approximate time (min.) available when
you use a fully charged battery pack.

HDV format pictures

DV format pictures

* When the LCD backlight turns on.

On the battery pack
• Before changing the battery pack, slide the

POWER switch to OFF (CHG).

• The CHARGE lamp flashes during charging, or

Battery Info (p. 48) will not be correctly
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery

Info only).

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord is disconnected from the wall outlet.

• When attaching an optional video light, it is

recommended that you use a NP-F970 battery
pack.

On the charging/recording/playback time
• Times measured with the camcorder at 25 °C

(77 °F) (10 to 30 °C (50 °F to 86 °F)) is
recommended).

• The recording and playback time will be shorter

when you use your camcorder in low
temperatures.

• The recording and playback time will be shorter

depending on the conditions under which you
use your camcorder.

You can use the AC Adaptor to obtain AC.
While you are using the AC Adaptor, the
battery pack will not lose its charge even
when it is attached to your camcorder.

Connect your camcorder as shown
in Step3:Charging the battery pack
(p. 18).

On the AC Adaptor
• Use the nearby wall outlet when using the AC

Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

PRECAUTION
• Even if your camcorder is turned off, AC power

(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.

Battery pack

LCD panel
opened*

LCD panel
closed

NP-F570
(supplied)

245

245

NP-F770

510

510

NP-F970

760

760

Battery pack

LCD panel
opened*

LCD panel
closed

NP-F570
(supplied)

270

270

NP-F770

550

550

NP-F970

830

830

Using an outside power source

Step 3: Charging the battery pack (Continued)

Advertising