Sony HDR-FX7 - Manual (Page 40)

40
1
During standby, press the
PICTURE PROFILE button C.
2
Select a picture profile number by
turning the SEL/PUSH EXEC dial
A, then press the dial.
[PP1] through [PP6] are available.
You can shoot with the settings of the
selected picture profile.
3
Select [OK] by turning the SEL/
PUSH EXEC dial A.
To cancel the picture profile recording
Select [OFF] in step 2, then press the SEL/
PUSH EXEC dial A.
To change the picture profile
You can change the settings in [PP1]
through [PP6].
1 Press the PICTURE PROFILE button
C.
2 Select the PICTURE PROFILE number
by turning the SEL/PUSH EXEC dial
A, then press the dial.
3 Select [SETTING] by turning the SEL/
PUSH EXEC dial A, then press the
dial.
4 Select an item to be adjusted by turning
the SEL/PUSH EXEC dial A, then
press the dial.
5 Adjust the picture quality by turning the
SEL/PUSH EXEC dial A, then press
the dial.
Picture profile
number (setting
name)
Recording condition
PP1
:PORTRAIT Appropriate setting to
record people
PP2
:CINEMA Appropriate setting to
record film-like pictures
PP3
:SUNSET Appropriate setting to
record sunset
PP4
:MONOTONE Appropriate setting to
record monotone pictures
PP5
:------ You can assign your own
setting
PP6
:------ You can assign your own
setting.
Item Adjustment
[COLOR
LEVEL] –7 (low) to +7 (high)
–8 (black and white)
[COLOR
PHASE] –7 (greenish) to +7
(reddish)
[SHARP-
NESS] 0 (softer) to 15 (clearer)
[SKINTON
E DTL] To make wrinkles less
noticeable by suppressing
the outlines on the part of
skin color.
[TYPE1] (the color range
recognized as a skin color
is narrow) to [TYPE3] (the
color range recognized as
a skin color is wide)
[OFF]: no adjustment
[WB
SHIFT] –7 (to make picture bluish)
to +7 (to make white parts
reddish)
[CINEMA-
TONE
GAMMA
]
When you set [ON],
pictures are recorded with
the gamma curve that
reproduces the natural
gradation sequence,
similar to that of film
cameras
Changing the settings of your camcorder recordings (Continued)