Alpine IDA-X300 - Manual (Page 30)

28
-EN
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select a list
you want to delete, and then press
/ENTER.
4
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select
DELETE YES, and then press
/ENTER.
DELETE NO YES
Select “NO” the unit will return to the Memory List display.
5
Press FUNC./SETUP to cancel the Function mode.
• If no operation is performed for 10 seconds , the unit returns to
normal mode.
Search Function
You can search for programs by Category, Channel, Artist or Song.
1
Press /ENTER in the XM or SIRIUS mode.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select
Search mode, and then press
/ENTER.
CATEGORY CHANNEL ARTIST * SONG *
* SIRIUS Only.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
desired Category, and then press
/ENTER.
4
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
desired Channel Name, and then press
/ENTER.
• While in Category Search mode, press to select a different
search mode.
• The Search mode is canceled if you press and hold for at least 2
seconds in Category Search mode.
• If Alert interruption occurs in the search mode, the search mode is
canceled.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
desired Channel/Artist/Song Name, and then press
/ENTER.
• While in Channel/Artist/Song Search mode, press to select a
different search mode.
• The Search mode is canceled if you press and hold for at least 2
seconds in Channel/Artist/Song Search mode.
• Channel search is possible only in the category (last mode).
• If Alert interruption occurs in the search mode, the search mode is
canceled.
Switching between Quick Search mode
and Category up/down mode (iDA-X300
only)
1
Press FUNC./SETUP.
2
Turn the Rotary encoder to select the desired
adjust menu.
3
Press /ENTER.
The ON/OFF screen is displayed.
4
Turn the Rotary encoder.
Select ON.
When ON is set, either Quick Search mode or Category
up/down mode can be used.
5
Press /ENTER .
• You cannot set both QUICK SEARCH and CATEGORY UP/DN
mode to ON.
Quick Search Function
You can search for all channels in numerical order.
1
Press and hold /ENTER for at least 2 seconds in
XM or SIRIUS mode to activate Quick Search mode.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
desired Channel within 10 seconds.
The selected Channel is received.
• When Quick Search function is used, be sure to set QUICK SEARCH
to ON, For details, refer to “Switching between Quick Search mode
and Category up/down mode (iDA-X300 only)” (iDA-X300 only) on
page 28.
Select the desired CATEGORY (Category
up/down)
Press and turn the Double Action encoder to the
left or right.
Turning to the right will advance to the next Category.
Turning to the left will return to the previous Category.
The first channel in the selected Category is played back.
1
Press /ENTER for at least 2 seconds.
The Category up/down mode is activated.
2
Turn the Rotary encoder.
Turning to the right will advance to the next Category.
Turning to the left will return to the previous Category.
The first channel in the selected Category is played back.
Category Search mode
Channel/Artist/Song Search mode
QUICK SEARCH: Quick Search mode
CATEGORY UP/DN: Category up/down mode
By using this function on iDA-X200
By using this function on iDA-X300