Sony VGP-UPR1 - Manual (Page 17)

5 GB
VGP-UPR1 (JP/GB/FR/ES/CT/KR) 4-173-05-01(1)
Connecting to the
network (LAN)
You can directly connect an ADSL modem or
network (LAN) at home or in the office to the
LAN connector of this product. Connecting to the
Internet and transferring data between different
devices through the network is possible.
The product may be connected to a 100BASE-TX
or 10BASE-T type network. For peripheral devices
necessary to connect to the network, refer to
either the instruction manual supplied with the
ADSL modem, or directly contact the system
administrator of your network provider.
Also, for settings to connect to the network, refer
to the instruction manuals of your ADSL modem
or connected peripheral devices, or check the
settings of your provider, etc. For setups in your
office, consult your office network administrator.

Tip

Select the option “Local Area Connection Sony VGP-
UPR1 (Ethernet Adapter)” displayed in the “Network
Connections” screen to change the setting of the
network connected to the LAN connector.
Notes

To connect to the network, install the dedicated
software (see the instruction manual supplied with
your product).

The LAN connector of this product does not support
Network boot or Wake-on-LAN.
Connecting headphones
You can connect headphones to the
HEADPHONES connector on this product.

About volume

Depending on sound effects, sound sources, software
types, etc., the volume of the sound may differ
although the volume setting is the same. Change the
sound settings of your personal computer according to
your usage environment.

When you want to change the sound level in the sound
settings of each device, double click the appropriate
device, or select and display the properties of the
device. For more information on sound settings, refer
to the instruction manual or the online manual of
your personal computer.
Notes

When connecting/disconnecting this product to/from
a personal computer, the output setting from the
personal computer changes. While the product is
connected to a personal computer, the sound of the
personal computer will be output through the
HEADPHONES connector on this product.

Depending on the software, the sound may not be
output through the HEADPHONES connector on this
product. In this case, exit the software, and then follow
the procedure below to allow the sound to be output
from the headphones of the connected personal
computer, etc.
1
Right-click the icon on the taskbar,
then select the playback device.
The “Sound” screen appears.
2
From the displayed playback device,
select speakers or headphones of the
personal computer, then click “Set
Default.”
This product is identified as “Speakers
C-Media….”
3
Click “OK.”
Setting is complete and the sound will output
from the personal computer.