Sony VGP-UPR1 - Manual (Page 18)

 GB
VGP-UPR1 (JP/GB/FR/ES/CT/KR) 4-173-05-01(1)
Connecting the
microphone
You can use the microphone by connecting it to
the MIC connector of this product.
Note

While the product is connected to a personal
computer, the settings may change to activate the MIC
connector of this product. To activate the microphone
connector of the personal computer, follow the
procedure below.
1
Right-click the icon on the taskbar,
then select the recording device.
The “Sound” screen appears.
2
From the displayed recording devices,
select a device other than
“Microphone C-Media…,” and click
“Set Default.”
3
Click “OK.”
The setting change is complete, and the
microphone connector of the personal
computer will activate.

The microphone volume of this product may be set to
mute. In this case, change the volume level according
to your preference.
1
Right-click the icon on the taskbar,
then select the recording device.
The “Sound” screen appears.
2
From the displayed recording device,
select “Microphone C-Media…,” and
click “Properties.”
“Microphone Properties” appears.
3
Select the “Levels” tab and set the
microphone volume according to your
microphone.
Restrictions

When a personal computer is connected, a
maximum of two screens can be displayed,
including the LCD of the personal computer.

Do not use the product in the following ways:
– Simultaneous usage of the MONITOR and
DVI-D connectors of this product.
– Simultaneous usage of the product’s display
output and the personal computer’s exterior
display output.

The LAN connector of this product does not
support Network boot or Wake-on-LAN. When
you want to use the Network boot or Wake-on-
LAN features, use the LAN connector of your
personal computer.

Depending on the instant mode, types of
software or data, etc., the sound may not output
from the HEADPHONES connector.

The product does not support Windows Aero.

When a display is connected to the product, the
extended desktop mode will be set. Clone mode
(mirror mode) is not supported.

When multiple USB devices are connected, as a
characteristic of the USB, CPU load of the
personal computer may increase, resulting in a
decrease in software speed or printing speed of
the USB printer.

Playback of movies on the external display is
not supported. It is not supported even if the
display is connected as the primary monitor.

Movie playback and software that requires 3D
processing are not supported on the display
connected to this product.

The maximum bit and sampling rate of the
headphones output is 16 bits, 48 KHz.

In the case of certain models, when using the
“WinDVD” software, a connected display to
this product will not output images.

When starting or restoring Windows, a sound
to notify the device connection/disconnection
may sound. This is not a malfunction.