Selecting the input signal (input1/input2), Selecting the input signal (input1/ input2) – Sony SDM-S95ER User Manual
Page 11
Advertising
11
US
Selecting the input signal (INPUT1/
INPUT2)
Press the OK button.
The input signal change each time you press this button.
On-screen message
(Appears about 5 seconds on
the upper left corner.)
Input signal configuration
INPUT1 : DVI-D
DVI-D input connector
(digital RGB) for INPUT1
INPUT2 : HD15
HD15 input connector
(analog RGB) for INPUT2
INPUT
OK
Advertising