Avaya 1220 - Manual (Page 154)

Operating your Avaya 1220 IP Deskphone
154
Using Record On Demand key
If this feature is enabled, you can use the Record on Demand (ROD) key
to record your telephone conversation.
Press the ROD key to start or stop the call recording. This key is
associated with the active user ID and is displayed only if a call is active.
The ROD key blinks while it is connecting to the call recording application,
and is lit when the call is recording.
The ROD key is displayed in the following scenarios:
• Normal operation — Press the ROD key during an active call to
record the call.
• Call Recording (CR) application in ROD Mode — Press the ROD key
during an active call to record the call
• Bulk Recording — For an active call or unregistered DN/Position ID,
call recording is initiated even though the ROD key is not pressed.
Using SAVE key
Use the SAVE key to save the recording of an active call. This key is
associated with the active user ID and is operational only if a call is active.
The SAVE key is displayed in the following scenarios:
• Normal operations — If the SAVE key is pressed during an active
call, the call is saved.
• CR application in Bulk Record + Save everything mode — Recorded
conversation is saved at the end of the call. If the
SAVE key is
pressed, then the call is not saved.
1. Press the ROD key during an active call.
2. To stop the call recording, press the
ROD key again.