Sony HDR-CX430V User Manual
Page 18
Advertising
1
GB
To fasten the grip belt
To attach the Step Down Ring
Align the Step Down Ring with the
camcorder properly (), then turn it in the
direction of the arrow until the Step Down
Ring is locked in place ().
You can change the filter diameter to 37mm
(1 1/2 in.) by attaching the Step Down Ring,
allowing you to use the recommended
conversion lens.
You cannot attach the wide end conversion
lens/wide conversion lens, if the Step Down
Ring is attached.
To remove Step Down Ring, turn it in the
opposite direction from that of the arrow.
Advertising
This manual is related to the following products: