Sony DCR-SR100 - Manual (Page 37)

37
R
e
co
rd
in
g/
Pl
ay
ba
ck
To check the remaining battery .... qf
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO qf. If you press this
button once, BATTERY INFO appears on the
screen for about seven seconds. Press the
button while BATTERY INFO appears on the
screen to extend the indication to the 20-
second maximum.
Check the available free hard disk
space ................................... 6
See [HDD INFO] (p.59).
• During recording, the remaining recordable time/
number of still images are displayed.
To turn off the operation confirmation
beep .................................... 6
See [BEEP] on page 64.
To initialize the settings (Reset) ... qa
Press RESET qa to initialize all the
settings, including settings for date and
time. (Setup items customized on Personal
Menu are not initialized.)
Other part names and functions
3 Built-in 4ch microphone
When an external microphone (optional) is
connected, it takes precedence over the internal
microphone.
4 Remote sensor
Point the Remote Commander (p.41) towards
the remote sensor to operate your camcorder.
4 Recording lamp
The recording lamp lights up in red during
recording (p.63).
The lamp flashes when the remaining capacity
for the battery or the hard disk of the camcorder
is running low.
qd Speaker
Sounds come out from the speaker while
playing back.
• For how to adjust the volume, see page 31.
Recording/playback
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN:
VIEWFINDER: 90
99
Recording
capacity (approx.)
Remaining battery
(approx.)