Sony DCR-SR100 - Manual (Page 80)

80
A problem occurs when the camcorder is connected to the AC Adaptor.
• Turn off the power, and remove the AC Adaptor from the wall outlet. Then, connect it again.
An unknown image appears on the screen.
• The camcorder is in [DEMO MODE] (p.59). Touch the LCD screen.
An unknown indicator appears on the screen.
• They may be warning indicators or messages (p.88).
The image remains on the LCD screen.
• This occurs if you remove the AC Adaptor from the wall outlet or remove the battery pack
without turning off the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
• During Easy Handycam operation (p.24), you cannot turn the LCD backlight on/off pressing
and holding DISP/BATT INFO. Cancel Easy Handycam operation (p.27).
The buttons do not appear on the touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander) (p.21,
41).
The buttons on the touch panel do not work correctly or do not work at all.
• Adjust the screen ([CALIBRATION]) (p.97).
• If you change the aspect ratio of the image, the aspect ratio of the buttons of the touch panel
and indicators will switch to the selected one (p.23).
The image in the viewfinder is not clear.
• Extend the viewfinder (p.20).
• Use the viewfinder lens adjustment lever to adjust the lens (p.20).
The image in the viewfinder has disappeared.
• The image is not displayed in the viewfinder when the LCD screen is open. Close the LCD
screen (p.20).
LCD screen/viewfinder
Troubleshooting (continued)