Sony NW-HD3 User Manual

Page 101

Advertising
background image

The display turns off.

 The display automatically turns off if there is no operation for

about 30 seconds (when using the battery) or about 3 minutes
(when using the AC power adaptor) in stop mode. When
scrolling track titles, etc., the display turns off about 30 seconds
or about 3 minutes after scrolling is fi nished. Also, the display
turns off when pressing and holding MENU. For all the cases,
press any button to turn on the display again.

Connection with the computer/SonicStage

Symptom

Case and/or corrective action

The SonicStage software cannot
be installed.

 An operating system not compatible with the software is used

(

 page 10).

 All Windows applications are not closed. If you start the

installation while other programs are running, a malfunction
may occur. This is especially true for programs that require
large amounts of system resources, such as virus-check
software.

 There is not enough space on the hard disk of your computer.

You need 200 MB or more free space. Delete the unnecessary
fi les on your computer.

The installation appears to have
stopped before it has fi nished.

 Check for the appearance of an error message beneath the

installation window. Press the “Tab” key while holding
down the “Alt” key. If an error message has appeared, press
the “Enter” key. The installation will resume. If there is no
message, the installation is still in progress. Wait for a little
while longer.

The progress bar on the display of
your computer is not moving. The
access lamp of your computer has
not lit for a few minutes.

 The installation is progressing normally. Please wait. The

installation may take 30 minutes or more, depending on your
CD drive or system environment.

“PC Connect” is not displayed
when connecting to the computer
with the USB cable.

 Please wait for the authentication of the SonicStage software.
 Another application is running on the computer. Wait for a

while and reconnect the USB cable. If the problem persists,
disconnect the USB cable, restart the computer, and then
reconnect the USB cable.

 The USB cable is not connected properly. Disconnect the USB

cable and then reconnect it.

 A USB hub is used. Connecting via a USB hub is not

guaranteed. Connect the USB cable directly to the computer.

Continued

43

GB

Additional Information

Advertising