Sony NW-HD3 User Manual
Page 73
2
Connect the USB adaptor to the
player.
Insert the USB adaptor as shown below
until it clicks into place.
“PC Connect” appears in the display.
The setup display for automatic transfer
appears in the SonicStage window. Follow
the instructions in the window. For details,
see the SonicStage Help (
USB adaptor
USB adaptor connector
3
Click “Transfer” on the right side of
the SonicStage window.
The screen is switched to the Transfer
window.
4
Select “ATRAC Audio Device” from
the Transfer Destination list on
the right side of the SonicStage
window.
5
Click the tracks you want to transfer
from the My Library list on the left
side of the SonicStage window.
To transfer more than one track, hold
down the “Ctrl” key while selecting the
tracks. To transfer all tracks of the album,
click the album.
6
Click
on the
SonicStage window.
Transfer of the selected tracks starts.
You can check the transferring status on
the SonicStage window.
To stop transferring
Click
on the SonicStage
window.
Notes
Do not use the player where it will be subjected to
vibration when transferring audio data. Also, do not
place the player near magnetic objects.
To remove the USB adaptor from the player
While pressing the gray buttons on both sides,
push the USB adaptor inward, and then pull
it outward.
Continued
15
GB
Getting Started