Step 3: turning the power on, and, Setting up this product – Sony DEV-50 User Manual

Page 14

Advertising
background image

14

GB

5

When the battery is charged,
disconnect the AC Adaptor
from the DC IN jack of this
product.

Tips

When this product is on, you can check the

approximate amount of remaining battery

power (expected recording and playing time)

with the remaining battery indicator at the

upper right on the screen.

To remove the battery pack

 Turn off this product by pressing the

POWER button (p. 14), then open the

battery/memory card cover (p. 13).

 Slide the battery release lever and

remove the battery.

Step 3: Turning the

power on, and setting

up this product

Notes

If this product is used by more than one person,

adjust the diopter and the width whenever a

different person uses it.

1

Press the POWER button.

This product is turned on.

To turn off the power, press the POWER

button again.

2

Adjust the diopter until you
can see a clear image with each
eye by turning the diopter
adjustment knob.

Adjust the diopter for each eye separately.

If you bring your eyes close to the

viewfinder, the eye sensor reacts to display

the viewfinder screen.

3

Adjust the width between the left
and right viewfinder to fit your
eyes using the IPD ADJ dial.


Eye sensor

Battery release lever

Advertising
This manual is related to the following products: