Sony HT-DDW795 - Manual (Page 10)

10 US
a)
The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
• The VIDEO 3 button on the remote is not available
for receiver operation.
Name Function
O RETURN/
EXIT O
Press to
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCR, DVD player,
satellite tuner or blu-ray disc
player is displayed on the
TV screen.
Press RETURN/EXIT and TV
(M) at the same time to return
to the previous menu or exit
the TV’s menu while the
menu is displayed on the TV
screen.
P
V/v/B/b
After pressing AMP MENU
(E), DVD MENU (H), or
MENU (N), press
V, v, B or
b to select the settings. Then,
press
to enter the selection
for DVD MENU or MENU.
Press
also to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, DVD player or blu-ray
disc player.
Q DISPLAY Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or blu-ray
disc player.
Press DISPLAY and TV (M)
at the same time to display
TV’s information on the TV
screen.
R TOOLS
Press to display options
applicable to the entire disc
(e.g. disc protection), recorder
(e.g. audio settings during
recording), or multiple items
on a list menu (e.g. erasing
multiple titles).
Press TOOLS and TV (M) at
the same time to display
options applicable to the TV.
Name Function
S -/-- Press -/-- and TV (M) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
CLEAR Press to clear a mistake when
you press the incorrect
numeric button.
T Numeric
buttons
(number 5
a)
)
Press to
– preset/tune to preset
stations.
– select track numbers of the
CD player, DVD player or
blu-ray disc player. Press 0/
10 to select track number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (M) at the same time to
select the TV channels.
U TV INPUT
Press TV INPUT and TV (M)
at the same time to select the
input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
V AUTO CAL Press to activate the Auto
Calibration function.