Other operation, Naming inputs – Sony HT-DDW795 User Manual
Page 48
48
US
To create an index name
1
Use
V/v/B/b to create an index name.
Press
V/v to select a character, then press
B/b to move the cursor to the next position.
If you made a mistake
Press
B/b until the character you want to
change flashes, then press
V/v to select the
correct character.
Tip
You can select the character type as follows by
pressing
V/v.
Alphabet (upper case)
t Numbers t Symbols
2
Press .
The entered name is registered.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press
V/v repeatedly to select
“5-AUDIO”.
4
Press
or
b to enter the
menu.
5
Press
V/v to select “NAME IN”.
6
Press
or
b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 48).
Other Operation