Sony RM-AV3000 - Manual (Page 68)

68
4
Keep COMMANDER OFF
pressed for more than 2 seconds
to turn the Commander off.
To reset the standby mode to off,
follow Steps 1 - 3 again.
Notes
• If the TEST key or the ON/OFF key is
pressed when the timer program is not
set, the “NG” sound is heard twice and
“NG” flashes.
• When you finish the timer setting mode
after you set the timer standby mode,
“c” mark stays lit beside the clock. This
means that one or more timer programs
are set to the timer standby mode.
• The timer program contents you have set
on this Commander repeat every week
until you set the timer standby mode to
OFF (weekly timer). If you want to
execute the timer program once, set the
timer standby mode to OFF after the
execution of the timer program.
IMPORTANT
The timer function of this
Commander is designed for the timer
operation of AV components. Do not
use the timer function to operate an
air-conditioner or electrical
appliances. It may cause a fire or a
serious injury.
To switch quickly the timer
standby mode to on or off using
the TIMER button
1
Press the TIMER button.
The program numbers of which timer
program is set to the standby mode
stay lit, and the other program
numbers flash on the Label keys.
To change the Label keys, press the
TIMER button repeatedly.
2
Select the program number of
which timer standby mode you
want to switch to on by pressing
the Label key.
If you select the program number
which has no timer program data, the
“NG” sound is heard and “NG”
flashes twice.
3
Press the ON OFF key.
With a beep sound, “c” mark lights
and the standby mode of the selected
timer program is set to on. The
display returns to Step 1.
Setting the Timer (continued)