Sony SDM-X202 User Manual
Page 6
6
Rear of the LCD display
K
AC IN connector (page 8)
This connector connects the power cord (supplied).
L
Security Lock Hole
The security lock hole should be used with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
M
Audio input jack for INPUT1 (page 8)
This jack inputs audio signals when connected to the audio
output jack of a computer or other audio equipment.
N
Audio input jack for INPUT2 (page 8)
This jack inputs audio signals when connected to the audio
output jack of a computer or other audio equipment.
O
DVI-D input connector (digital RGB) for INPUT2
(page 7)
This connector inputs digital RGB video signals that comply
with DVI Rev. 1.0.
P
HD15 input connector (analog RGB) for INPUT1
(page 7)
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) and sync signals.
Q
HD15 input connector (analog RGB) for INPUT2
(page 7)
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) and sync signals.
R
USB (Universal Serial Bus) downstream connectors
(page 11)
These connectors are used to connect the monitor to USB
compliant peripheral devices.
S
USB (Universal Serial Bus) upstream connector for
INPUT1 (page 11)
This connector is used to connect the monitor to a USB
compliant computer.
T
USB (Universal Serial Bus) upstream connector for
INPUT2 (page 11)
This connector is used to connect the monitor to a USB
compliant computer.
U
Cable holder (page 9)
This part secures cables and cords to the monitor.
V
Arm cover (page 9)
Remove this cover to bundle connecting cords and cables.
W
Latch (page 9)
This part secures cables and cords to the monitor.
qd
qf
qa
qs
qg
qh
qj
qk
w;
ql
ws
wd
wa