Sony STR-DH800 - Manual (Page 24)

24 US
4b: Connecting the video components
This section describes how to connect your
video components to this receiver. Before you
begin, see “Component to be connected”
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to “5: Connecting the antennas
(aerials)” (page 31).
Component to be connected
If you want to connect several
digital components, but cannot
find an unused input
See “Enjoying the sound/images from other
inputs” (page 94).
The image quality depends on the connecting
jack. See the illustration that follows. Select
the connection according to the jacks on your
components.
Notes
• Before connecting cords, be sure to disconnect the
AC power cord.
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
How to connect your
components
Component Page
TV 21
With HDMI jack 25
DVD player 27
Blu-ray disc player 28
Satellite tuner/Set-top box 29
VCR, DVD recorder 30
Camcorder, video game, etc. 30
Video input/output jack to be
connected
HDMI
VIDEO
COMPONENT VIDEO
Y
P B / C B
P R / C R
Digital Analog
High quality image