Acesonic 400 Disc DVD CD G Karaoke Changer DGX-400 User Manual

Page 7

Advertising
background image

6

Notes

*Any disc that is not listed above will cause the player to
display “NO DISC” in the DISPLAY WINDOW. Future
media and disc formats maybe supported with firmware
upgrade, when available.

*Encoding methods of some media formats may affect
the playback (e.g. Unable to fast forward or fast
backward or load time). Be sure that the encoding
process conforms to the standards for that particular
format.

*Dirty, scratched, warped, and defective discs may cause
a considerable time delay during the loading and reading
of the disc. In extreme cases, this may render the disc

Video Signal Formats

This player also accommodates NTSC and PAL color
systems, with automatic detection and override settings.

Digital Audio Formats

This player accommodates, Dolby Digital 5.1 Channels,
DTS, and AC-3.

*Depending on the AUDIO SETUP> SPDIF settings
digital audio signals may not be output as they are
recorded on the disc.

Notes Regarding Discs

*Some DVD's, the player starts playback automatically
after inserting the disc, regardless whether or not PLAY
BACK CONTROL is on or off.
*The image may be poor, noisy, or grainy due to actual
defects on the disc itself.
*Some functions may not be possible on all discs as
described in this manual.

NOTE

Handling

*At anytime, when handling discs, always hold them
from their edges and/or by the circle in the center.
*NEVER write on the any surface of the disc for it may
render the disc unreadable.
*Store discs in a clean and dry environment. Storing
CD’s vertically will also help prevent warping.
*After use, insert CD into jacket or case to minimize
wear and tear DO NOT stack CDs on top of one another.
*Do not bend or press the disc. Do not expose the disc
to direct sunlight or any heat source.

Cleaning

*Wipe the discs from time to time using a soft cloth.
Always wipe from the center towards the edges. NOT in
circular motions.
*DO NOT clean with any other cleaning solution, unless
it is specifically made for disc cleaning.

CDs revolve at very high speeds inside of players. Never
attempt to play cracked or warped CDs; doing so may
cause the disc to shatter inside or the player to
malfunction.

Handling and Cleaning of

NOTE

Power-Cord

Handle the power cord only by its plug, do not unplug
the power cord by tugging or yanking on the cord.
Touching or unplugging the cord while your hands are
wet may lead to an electric shock or a short circuit. If the
cord becomes damaged or its wires become exposed,
please replace the cord as soon as possible in order to
prevent an electric fire or shock. Check the power cord
every few months to ensure it is functioning properly.

CAUTION

Advertising