AT&T 9320 - Manual (Page 7)

6
T E L E P H O N E M E M O R Y
Store a Pause
in a Memory Number
Press to store a two-second pause
in the dialing sequence. Each
press adds another two-second
pause and counts as one digit.
Store Memory Numbers
1 Make sure the handset is off.
2 Press
G. The phone light
blinks.
3 Press the number button (0–9)
where you want to store the
telephone number.
4 Dial the telephone
number (up to 16 digits)
— OR —
Press
to store the
last number dialed.
5 Press M.
Directory Label
Use the included self-adhesive
directory label to keep a record
of the numbers (or names)
stored in memory. It’s best to
write on the label before
applying it to the phone.
This cordless phone can store 10 telephone numbers, each
up to 16 digits long. You can dial numbers stored in memory
just by pressing
P, M and a number button.
Dial Memory Numbers
1 Press
P.
2 Press and release
M, then
press the number button (0–9)
where the memory number is
stored.
Change/Replace a Stored
Memory Number
Store a new number in its place.