Sony RDP-XA900iP - Manual (Page 23)

19 US
Listening to Bluetooth
Devices
By using the Bluetooth connection, you can
listen to the sound from a Bluetooth device
such as a mobile phone or portable audio
player with the unit wirelessly.
Bluetooth devices need to be “paired” with
each other beforehand. Once Bluetooth
devices are paired, there is no need for pairing
again, unless pairing information is deleted.
You can register up to nine Bluetooth devices
to be paired on the unit. If you register a 10th
device, the least recently used information is
deleted.
1
Keep a Bluetooth device and
the unit within one meter of
each other for this operation.
2
Press and hold the PAIRING
button on the unit.
When pairing starts, a double-beep sound
will be heard and the Bluetooth indicator
will flash quickly. Pairing mode of the
unit is activated.
3
Perform the pairing procedure
on the Bluetooth device to
detect the unit.
A list of detected devices appears on the
display of the Bluetooth device.
This unit is displayed as “RDP-XA900iP
(Bluetooth).”
If “RDP-XA900iP (Bluetooth)” is not
displayed, repeat from step 1.
4
Select “RDP-XA900iP
(Bluetooth)” shown in the
display of the Bluetooth device.
5
If Passcode* input is required
on the display of the Bluetooth
device, input “0000.”
* Passcode may be called “Passkey,” “PIN
code,” “PIN number,” or “Password.”
6
Start the Bluetooth connection
from the Bluetooth device.
The unit memorises the device as the last
connected device. Some Bluetooth
devices may connect with the unit
automatically when pairing is complete.
The Bluetooth indicator lights up when
the connection is made.
Tips
• For details on how to operate the device to be
connected, refer to the operating instructions
supplied with the device.
• To pair with other Bluetooth devices, repeat steps 1
to 5 for each device.
Notes
• Pairing mode is cancelled after about 5 minutes. If
pairing mode is cancelled halfway, start over from
step 1.
• When you try to pair the unit with your Bluetooth
device for the first time, the pairing mode is
activated as soon as you press the BLUETOOTH
button. In this case, the pairing mode is not
cancelled after about 5 minutes.
• Pairing information is deleted after repair, etc.
• Passcode of the unit is fixed as “0000.” The unit
cannot be paired with a Bluetooth device whose
Passcode is not “0000.”
The unit supports SCMS-T content protection.
You can listen to a Bluetooth device that
supports SCMS-T content protection.
Check the following before operating the unit.
• The Bluetooth function of a Bluetooth
device is on.
• The pairing procedure is complete
(page 19).
Pairing with a Bluetooth device
Operating a Bluetooth device