Sony RDP-XA900iP - Manual (Page 31)

27 US
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Power Output (reference)
Tweeter 25 W + 25 W (at 10% harmonic
distortion)
Woofer 25 W + 25 W (at 10% harmonic
distortion)
Subwoofer 50 W + 50 W (at 10% harmonic
distortion)
Section for iPod
DC out: 5 V
MAX: 2.1 A
Section for Wireless LAN
Compatible standards
IEEE 802.11 b/g
(WEP 64 bit, WEP 128 bit,
WPA/WPA2-PSK (AES),
WPA/WPA2-PSK (TKIP))
Radio frequency
2.412 GHz – 2.462 GHz
(2.4 GHz ISM Band, 11 Channels)
Channel 1 – Channel 11
Section for Bluetooth
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight Approx. 10 m*
1
Radio frequency
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Communication System
Bluetooth Specification Version 2.1 + EDR
(Enhanced Data Rate)
Compatible Bluetooth Profiles*
2
A2DP (Advanced Audio Distribution Profile)
AVRCP*
3
(Audio Video Remote Control
Profile)
Supported codec
*4
SBC (Subband Codec)
Copy Management
SCMS-T
*
1
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity, aerial’s
performance, operating system, software
application, etc.
*
2
Bluetooth standard profiles indicate the
purpose of Bluetooth communication between
devices.
*
3
Some operations may not be available due to
different iPod.
*
4
Codec: Audio signal compression and
conversion format
General
Speakers
Tweeter
Approx. 20 mm (
7
/
8
inches) diameter × 2
Woofer
Approx. 70 mm (2
7
/
8
inches) diameter × 2
Subwoofer
Approx. 135 mm (5
3
/
8
inches) diameter × 1
AUDIO IN
ANALOG
φ 3.5 mm stereo mini jack
DIGITAL Optical
VIDEO OUT
Max output level 1 Vp-p, unbalanced
Sync negative, load impedance 75
Ω
(Composite video out)
Network port
10BASE-T/100BASE-TX (Auto Polarity)
Power requirements
120 V AC, 60 Hz
Power consumption
AC 70 W