Sony HDR-TD10 - Manual (Page 28)


US

Set the 2D/3D switch to 2D.

Press MODE to turn on the (Photo) lamp.
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.

Press PHOTO lightly to adjust the focus, then press it fully.
Note
You cannot shoot photos in 3D.
Tips
To change the image size, touch (MENU)  [Image Quality/Size]  [ Image Size]  a desired
setting  .
You cannot record photos while is displayed.
Your camcorder flashes automatically when there is insufficient ambient light. The flash does not work in
the movie recording mode. You can change how your camcorder flashes by (MENU)  [Camera/
Mic]  [ ( Flash)]  [Flash]  a desired setting  .
If white circular spots appear on photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camcorder’s flash, they appear as white circular spots.
To reduce the white circular spots, light the room and shoot the subject without a flash.






Particles (dust, pollen, etc.)
in the air