Sony NSZ-GU1 - Manual (Page 17)

17
NSZ-GU1 4-471-308-11(1)
Troubleshooting
There is no picture (screen is dark).
– Make sure that the Smart Stick is securely
connected to the MHL jack.
– Make sure that the supplied USB cable is securely
connected to the Smart Stick and your BRAVIA.
– Make sure that all the connecting cables are
securely connected. (Especially, make sure HDMI
IN is correctly connected.)
– Change the input of the TV to display the signal
from the MHL jack of the Smart Stick.
– Make sure that the power indicator is lit up white
as illustrated below.
Power indicator
– Connect a Cable/Satellite Box to the HDMI IN jack.
(When you press TV, GUIDE, or DVR on the remote
control, the image from the device connected to
the HDMI IN jack will appear on the TV screen.)
Press (HOME) on the remote control, and
then select any application other than Live TV to
return to the Smart Stick screen.
– Try the following:
– Disconnect the Smart Stick from the TV and
reconnect it securely to the MHL jack.
– Turn the connected device off and on again.
– Disconnect and reconnect the Micro HDMI cable.
The remote control does not function.
– Make sure that the batteries are inserted correctly
into the remote control. If the remote control still
does not function, re-pair the remote control with
the Smart Stick by following the procedure below.
 Press shortly the CONNECT button, located on
the side of the Smart Stick.
 Follow the instructions on the screen.
CONNECT button