Sony DPP-FP30 - Manual (Page 12)

12 GB
6
Close the paper tray lid (1)
and slide it to the paper
feeding direction (2).
Keep the paper eject tray open.
7
Push and open the printer’s
paper tray compartment lid.
8
Insert the paper tray into the
printer.
Insert it firmly until it clicks into
place.
Notes
• Do not remove the paper tray during
printing.
• To avoid paper jam or malfunctions of the
printer, make sure the following before
printing:
– Do not write or type on the print paper.
Use the oil ink pen to write on the paper
after printing. You cannot type on the
print paper.
– Do not attach sticker or stamps on the
print paper.
– Do not hold or bend the print paper.
– When adding print paper to a partially
full tray, make sure that the total
number of sheets does not exceed 20 for
the print paper.
– Do not print on the used print paper.
Printing an image twice on the same
paper will not make the printed image
thicker.
– Use the print paper for this printer only.
– Do not use the print paper ejected
without printed.
Notes on storing the print paper
• Avoid storing the paper with the printed
faces touching each other or in contact
with rubber or plastic products including
vinyl chloride or plasticizer for an
extended period of time; color changes or
deterioration of the printed image may
occur.
• Avoid placing the print paper in a location
subject to high temperatures, high
humidity, excessive dust or direct sunlight.
• When you are going to store partially-used
print paper, store it in its original bag.