Sony DPP-FP30 - Manual (Page 37)

37 GB
Troubleshooting
Symptom
Paper does not
feed.
The print paper
emerges during
printing in
process.
Printing
When you place print paper in the paper tray and start printing, paper feeding
error may occur: the printer does not feed paper; the printer may feed
overlapped paper; or the printer may feed paper diagonally. If this occurs, check
the items listed in the following symptom “Paper does not feed”.
Check
• Is the print paper properly
set in the paper tray?
• Are you using print paper
that was not designed for
the printer?
• Is the print paper jammed?
• Is it in the middle of the
printing process?
Cause/Solutions
c If print paper is not properly loaded, the
printer may develop trouble. Check the
following:
• Is the correct set of print paper and print
cartridge loaded? ( .page 8)
• Did you place print paper exceeding the
limit in the paper tray? ( .page 10)
• Did you set the tray adaptor according
to the print paper size you use?
(
.page 10)
• Did you riffle the print paper thoroughly?
• Did you bend or fold the print paper
before printing?
c If print paper runs out during continuous
printing or if you print with no print paper
in the paper tray, the printer’s ERROR
indicator lights. Feed the print paper
without turning off the power and resume
printing.
c Use print paper designed for the printer. If
you use incompatible print paper, the
printer may develop trouble. (
.page 8)
c When the printer cannot feed the print
paper, the ERROR indicator flashes
rapidly. Remove the paper tray and
check paper jam. (
.page 41)
c The print paper may emerge a few times
during printing. Do not touch nor pull
the emerged paper. Wait for the print
paper to be fully ejected after printing
ends. Make sure to spare enough space
behind the printer during printing.