Rec mode: selecting the continuous shooting method – Sony DSC-T20 User Manual
Page 37
37
U
si
ng func
tions
for
s
h
ooti
n
g
Shooting menu
For details on the operation 1 page 30
Selects whether the camera performs continuous shooting or not when you press the shutter button.
On the Burst
• When recording with the self timer, a series of a maximum of five images is recorded.
• The recording interval is approximately 0.46 second. The recording interval is longer, depending on the
setting for the image size.
• When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst
stops.
• You may not be able to shoot images in the Burst mode depending on the Scene Selection mode (page 34).
On the Exposure Bracket
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When the exposure is manually adjusted (page 39), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approximately 0.46 second.
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step
value.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection
REC Mode: Selecting the continuous shooting method
(Normal)
Does not shoot continuously.
(Burst)
Records up to 100 images in succession when you press and
hold down the shutter button.
• The flash is set to
(Flash forced off).
BRK ±0.3EV
Records a series of three images with the exposure values
automatically shifted (Exposure Bracket).
The larger the bracket step value, the larger the shift of the
exposure value.
• When you cannot decide the correct exposure, shoot in the
Exposure Bracket mode, shifting the exposure value. You can
select the image with the best exposure afterward.
• You cannot shoot in the Exposure Bracket mode, when
(Shooting) is set to [
Auto Adjustment].
• The flash is set to
(Flash forced off).
BRK ±0.7EV
BRK ±1.0EV