Sony DSC-T20 - Manual (Page 42)

42
Shooting menu For details on the operation 1 page 30
• AF stands for Auto Focus.
• Distance setting information in [Focus preset] is approximate. If you point the lens up or down, the error
increases.
• When you use Digital Zoom or AF illuminator, the normal AF range finder frame is disabled and a new
AF range finder frame is displayed by a dotted line. In this case, the priority of AF movement is given to
subjects around the center of the frame.
z If the subject is out of focus
When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF] or [Spot
AF], the camera may not focus on a subject at the edge of the frame.
In such cases, do as follows.
1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter
button halfway down to focus on the subject (AF lock).
As long as you do not press the shutter button fully down, you can retry the procedure as many
times as you want.
2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot,
and press the shutter button fully down.
0.5 m Focuses on the subject using a previously set distance to the
subject. (Focus preset)
• When shooting a subject through a net or through window glass,
it is difficult to get the proper focus in auto focus mode. In these
cases, use of [Focus] is convenient.
1.0 m
3.0 m
7.0 m
(unlimited distance)
AE/AF lock indicator
AF range finder frame