Precautions – Sony DSC-F717 User Manual

Page 113

Advertising
background image

113

Ad
d

iti

o

n

a

l in
fo

rma

tio

n

Precautions

On cleaning

Cleaning the LCD screen

Wipe the screen surface with an LCD
cleaning kit (not supplied) to remove
fingerprints, dust, etc.

Cleaning the lens

Wipe the lens with a soft cloth to remove
fingerprints, dust, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth
slightly moistened with water, then wipe
the surface dry. Do not use any type of
solvent such as thinner, alcohol or benzine
as this may damage the finish or the casing.

After using your camera at the
seashore or other dusty locations

Clean your camera carefully. Otherwise,
the salty air may corrode the metal fittings
or dust may enter the inside of your camera,
causing a malfunction.

Note on operating temperature

Your camera is designed for use between
the temperatures of 0°C and 40°C (32

°

F

and 104

°

F). Shooting in extremely cold or

hot places that exceed this range is not
recommended.

On moisture condensation

If the camera is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense inside
or outside the camera. Should this occur, the
camera will not operate properly.

Moisture condensation occurs easily
when:

• The camera is brought from a cold

location such as a ski slope into a warmly
heated room.

• The camera is taken from an air-

conditioned room or car interior to the hot
outdoors, etc.

How to prevent moisture
condensation

When bringing the camera from a cold
place to a warm place, seal the camera in a
plastic bag and allow it to adapt to
conditions at the new location over a period
of time (about an hour).

If moisture condensation occurs

Turn off the camera and wait about an hour
for the moisture to evaporate. Note that if
you attempt to shoot with moisture
remaining inside the lens, you will be
unable to record clear images.

On internal rechargeable button
battery

This camera has an internal rechargeable
button battery for maintaining the date and
time and other settings regardless of
whether the power is on or off.
This rechargeable button battery is
continually charged as long as you are using
the camera. However, if you use the camera
for only short periods it discharges
gradually, and if you do not use the camera
at all for about one month it becomes
completely discharged. In this case, be sure
to charge this rechargeable button battery
before using the camera.
However, even if this rechargeable button
battery is not charged, you can still use the
camera as long as you do not record the date
and time.

Charging method

Connect the camera to a wall outlet (mains)
using the AC power adaptor, or install a
charged battery pack, and leave the camera
for 24 hours or more with the power off.

Advertising