Sony DSC-F717 - Manual (Page 80)

80
e Decide on a cutting point.
Press the center z at the desired
cutting point.
When you want to adjust the cutting
point, use [c/C] (frame forward/
rewind) and adjust the cutting point
using b/B. If you want to change the
cutting point, select [CANCEL]. The
playback of the movie starts again.
f When you have decided on a
cutting point, select [OK] with
v / V , and press z .
g Select [OK] with v , then press
z .
The movie is cut.
The recording folder appears at the
upper right of the screen.
To cancel cutting
In Step 5, select [EXIT]. The movie
appears on the screen again.
• The cut movie are recorded as the newest files
in the selected recording folder.
• You cannot cut the following files.
– Clip Motion files
– Multi Burst files
– Still image files
– MPEG movie files not long enough to cut
– Protected MPEG movie files
• You cannot restore files once you cut them.
• The original file is deleted when you cut it.
Deleting unnecessary
portions of movies
a Cut an unnecessary portion of
a movie (page 79).
b Display the portion of the
movie you want to delete.
c Press MENU.
The menu appears.
d Select [DELETE] with b / B ,
then press z .
e Select [OK] with v , then press
z .
The movie currently displayed on the
screen is deleted.
OK
DIVIDE
160
CANCEL
OK
DIVIDING
POINT
EXIT
c C
60 min
101 10/10
00:00:02