Sony VGP-UHDP04 - Manual (Page 13)

13
4
Touch the wireless key receiver with the other wireless key
after the blue light of the wireless key receiver starts to flash
again.
The blue light will go out after the other wireless key is registered.
z Tips
• The blue light of the wireless key receiver repeats this pattern: flashes twice and
goes out for one second. If you do not touch the wireless key receiver with the
wireless key for more than about 5 seconds, the blue light of the wireless key
receiver goes out and the previous status returns. In this case, follow the procedure
from step 1 again to register the wireless key.
• If the blue light of the wireless key receiver keeps flashing even after touching
wireless key receiver with the wireless key, you may have touched it with the first
key by mistake. Try touching with the other key.
• If you use the Windows 2000 operating system, “Unsafe Removal of Device”
appears.
5
Disconnect the hard disk drive form the computer (page 10).
Registering is complete. The security function will be activated from
the next time you connect the USB cable to the computer.
Continued on next page