Sony VGP-UHDP04 - Manual (Page 9)

9
About the power management function (power save
function)
When using the computer’s power management function (power save
function), note the following points:
• Set your computer so that it does not switch to a power save mode while
the ACCESS indicator on the hard disk drive is flashing. For more
information, refer to the manuals provided with your computer.
• Before switching your computer to a power save mode, make sure the
hard disk drive’s ACCESS indicator is not illuminated, and then close
software that is running.
• While the computer is in a power save mode, do not connect or
disconnect the USB cable.
Continued on next page