Sony PFM-510A1WU - Manual (Page 18)

18
(GB)
MEMORY menu
This menu is used for saving or recalling the settings
in the PIC CONTROL, PIC SIZE and CONFIG (only
for ENHANCE and H FILTER) menus.
M E M O R Y
L O A D
S A V E
S E L E C T C A N C E L ENTER MENU
qj
qk
For details, see “Using the Memory” on page 25 (GB).
qj LOAD
Recalls the preset settings.
qk SAVE
Saves the settings.
REMOTE menu
This menu is used for the remote control setting.
R E M O T E
I N D E X N O . : 0 0 1
R E M O T E M O D E : T V
R E M O T E O N L Y : O F F
S E L E C T C A N C E L ENTER MENU
w;
ql
wa
ql INDEX NO.
Sets the index number of the monitor.
Note
When you set the number, use the buttons on the
monitor.
For details on the index number, see “Operating a Specific
Monitor With the Remote Commander” on page 27 (GB).
w; REMOTE MODE
Select the Remote Commander mode.
TV: Sony monitors’ or TVs’ commander
PJ: Sony projectors’ commander
OFF: Disables the remote control.
For details, see “Using the Other Remote Commander” on
page 28 (GB).
wa REMOTE ONLY
Select ON to disable the front control buttons on the
monitor. The monitor can only be controlled with the
Remote Commander. While REMOTE ONLY is ON,
the indicators on the front panel go off.
To cancel the REMOTE ONLY mode, set REMOTE
ONLY to OFF with the Remote Commander, or press
the CTRL button while pressing the 1 switch. The
monitor turns to the standby mode and the REMOTE
ONLY mode is canceled.
The setting in this item is still retained when the AC
power cord is disconnected.
STATUS menu
This menu is used for displaying the internal condition
of the monitor.
S T A T U S
[ P F M - 5 1 0 A 1 W U ]
S E R I A L N o . : 2 0 0 0 0 0 1
O P E R A T I O N : 0 0 0 0 0 0 H
S O F T W A R E : Ver 1 . 0 0
T E M P E R A T U R E : O K
F A N : O K
wg
wf
wd
ws
wh
wj
ws Model name
Indicates the model name.
wd SERIAL No.
Indicates the serial number.
wf OPERATION
Indicates the total operation hours.
Note
The standby mode is not counted as OPERATION
time.
wg SOFTWARE
Indicates the system software version.
wh TEMPERATURE
Indicates whether the internal temperature of the
monitor is usual.
OK: Usual
NG: Unusual
When the internal temperature is unusual, NG is
displayed and the item flashes in red. The 1 indicator
on the control panel also flashes.
Using On-screen Menus