Wireless remote commander – Sony HDR-PJ650V User Manual

Page 16

Advertising
background image

1

GB

When attaching the lens hood, align the

opening section of the lens hood with the flash-

emitting section of the camcorder properly.

To remove the lens hood, turn the securing ring

of the lens hood in the opposite direction from

that of the arrow.

Remove the lens hood when you operate

the camcorder with the supplied remote

commander.

To attach the Step Down Ring

Align the Step Down Ring with the

camcorder properly (), then turn it in the

direction of the arrow until the Step Down

Ring is locked in place ().

You can change the filter diameter to 37mm

(1 1/2 in.) by attaching the Step Down Ring,

allowing you to use the recommended

conversion lens.

You cannot attach the wide end conversion

lens/wide conversion lens, if the Step Down

Ring is attached.

To remove Step Down Ring, turn it in the

opposite direction from that of the arrow.

Wireless Remote Commander

Using the wireless remote commander is

helpful when projecting recorded images

from your camcorder.

DATA CODE button (52)

Displays the date and time, camera setting

data, or coordinates (models with GPS) of the

recorded images when you press this button

during playback.

PHOTO button (27)

Records as a still image the image that is

displayed on the screen when this button is

pressed.

SCAN/SLOW buttons (31)

/ (Previous/Next) buttons (30)

PLAY button

STOP button

DISPLAY button (27)

Transmitter

START/STOP button (26)

Power zoom buttons

PAUSE button

VISUAL INDEX button (30)

Displays an Index screen during playback.

////ENTER buttons

Displays a light blue frame on the LCD screen

when you press any of these buttons. Select

a desired button or an item with ///,

then press ENTER to enter.

Advertising