Preset tuning 47, Preset tuning – Sony STR-DE875 User Manual

Page 47

Advertising
background image

47

Receiving Br

oadcasts

nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N

nC0˜...C2˜C1N

Preset Tuning

For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts” on
page 45.

Before tuning to preset stations, be sure to preset them by
performing steps on “Presetting radio stations” below.

Presetting radio stations

1

Rotate FUNCTION to select the tuner.
The last received station is tuned in.

2

Tune in the station that you want to preset using
Direct Tuning or Automatic Tuning (page 46).

3

Press MEMORY.
“MEMORY” appears in the display for a few seconds.
Do Steps 4 to 6 before “MEMORY” goes out.

4

Press SHIFT to select a memory page (A, B or C).
Each time you press SHIFT, the letter “A”, “B” or “C”
appears in the display.

5

Select a preset number by pressing PRESET TUNING
+ or PRESET TUNING –.
If “MEMORY” goes out before you press the preset
number, start again from Step 3.

6

Press MEMORY again to store the station.
If “MEMORY” goes out before you can store the
station, start again from Step 3.

7

Repeat Steps 2 to 6 to preset another station.

To change a preset number to another station
Do Steps 1 to 6 to preset the new station to the number.

Tuning to preset stations

You can tune the preset stations either of the following
two ways.

Scanning the preset stations

1

Rotate FUNCTION to select the tuner.
The last received stations is tuned in.

2

Press PRESET TUNING + or PRESET TUNING –
repeatedly to select the preset station you want.
Each time you press the button, the receiver tunes in
one preset station at a time , in the corresponding
order and direction as follows:

Using the preset codes

1

Rotate FUNCTION to select the tuner.
The last received stations is turned in.

2

Press SHIFT to select a memory page (A, B or C),
then press the preset number of the station you
want using the numeric buttons on the supplied
remote.

Advertising