Sony DHC-MD515 - Manual (Page 22)

22
4
Press DISC SKIP to select the
desired CD.
5
Turn MULTI JOG to select the
desired track.
The total playing time including the
selected track flashes.
6
Press ENTER/YES.
The track is programmed.
The total number of programmed steps
appears, followed by the total playing
time of the program.
7
To program additional tracks,
repeat steps 4 through 6.
Skip step 4 if you want to select a track
from the same CD.
8
Press (P.
All the tracks play in the order you
selected.
Total playing time Last programmed
track
To cancel Program Play
Press CONTINUE.
To cancel programming tracks
Press p at any point from step 4 to 6.
To play a previously created
program
Press PROGRAM repeatedly until the desired
program number appears, then press (P.
To erase the entire program
Press PROGRAM repeatedly until the
program number you want to erase appears,
then press p once in stop mode.
To check the programmed track
number
In stop mode, press PROGRAM repeatedly
until the program number you want to check
appears, then press DISPLAY.
To check the programmed track
order
Turn MULTI JOG during Program Play.
To add a track to the program
1 In stop mode, press PROGRAM repeatedly
until the program number you want
appears.
2 Press DISC SKIP to select the desired CD.
3 Turn MULTI JOG to select the desired
track, then press ENTER/YES.
The selected track is added to the end of
the program.
Selected disc and track
numbers
Total playing time
Disc tray number
Programming CD tracks
(continued)
1 2 3
PROGRAM1
CD . 4 - 3 AL 7 1 6
1 2 3
PROGRAM1
CD . 7 - 3 3 9 0
Last programmed track
Number of total steps
1 2 3
PROGRAM1
CD . 7 - 3 3 9 0
1 2 3
PROGRAM1
CD p e - 1 1 l l 2 St