Sony DHC-MD515 - Manual (Page 36)

36
6
Press ENTER/YES.
“SYNC” starts flashing, then remains lit
in the display. The MD deck stands by
for recording and the CD pauses at the
beginning. If you use an MD with tracks
already recorded on it, the MD deck
automatically locates the end of the
recording and starts the new recording
from there.
7
Make sure that “SYNC” stops
flashing, then press (P.
CD starts playing and MD starts
recording. If the MD in the MD 1 slot
becomes full, the rest of the CD is
recorded on the MD in the next slot
number. Both the CD player and the
MD deck stop automatically when the
recording is completed.
To cancel recording
Press EDIT/NO at any point from step 3 to 5.
To stop recording
Press p.
When recording is finished
Remove the MD. “TOC Write” flashes and
the recorded contents are memorized on the
MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC
power cord to ensure complete recording.
The deck updates the Table of Contents
(TOC) while “TOC” is flashing.
Notes
• The Disc Memo Copy function is not activated
during Seamless Recording.
• If the MD in the MD 1 slot becomes full, the rest of
the CD is recorded on the MD in the next slot
number. Insert another recordable MD in the next
slot and remove the MD you do not want to
record on beforehand.
Recording multiple
CDs on MDs in
sequence
— Seamless Recording
You can use this feature to record three CDs
to MDs in sequence.
1
Insert CDs.
2
Insert a recordable MD.
Recording starts from the MD in the MD
1 slot. Remove the MD you do not want
to record on beforehand.
3
Press the CD button to switch the
function to CD.
4
Press REC/CD-MD SYNC.
5
Turn MULTI JOG until “SEAMLESS
?” appears.
3
p
4 5
6 7
EDIT/NO
1 2 3
1 2 3
SYNC
LEVEL SYNC
-
ALL DISCS
SEAML SS ? E
Example 1 Example 2
MD1
MD1
MD2
TAPE
1 2 3
1 2
SYNC
LEVEL SYNC
ALL DISC
CD1-1 0.00