Sony PEG-TJ27 - Manual (Page 31)

31
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 US A-BTH-100-11 (1)
T
rou
ble
s
h
o
o
ti
n
g
B The wireless LAN access point may be busy.
Wait for a short period of time and then try again.
B Turn off the wireless LAN access point once and turn it on, and then try
connecting to the wireless LAN access point again.
B You may be using your CLIÉ handheld near devices that use the 2.4GHz
frequency band, such as a microwave oven or a Bluetooth
®
compatible
device.
Use your CLIÉ handheld away from such devices, or turn off the devices.
B If you need a MAC address, check [MAC Address:] in the Connect
Setting screen by following the steps below.
1 Select [Network] in the Preferences screen.
2 Tap [V Service:] to select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Tap (Menu), then tap [ConnectionStatus...] from [Information].
The Connect Setting screen is displayed.
Note
If a MAC address is not displayed, tap [Connect] after step 2 and continue to step 3.
B Check the settings in the Preferences screen for [Network].
b For details, refer to “Customizing your CLIÉ
™
handheld (Preferences):
Changing the Network preferences” in the “Handbook” (PDF format).
I cannot connect to the Internet via a wireless LAN
(for PEG-TJ37 only) (continued)
The message “Incorrect setting” or “Certification is
invalid” appears
01US01COV.book Page 31 Monday, December 8, 2003 11:33 AM