Sony DSC-H3 - Manual (Page 48)

48
Shooting menu For details on the operation 1 page 39
• AF stands for Auto Focus.
• Allow a margin of error in the distance setting of “Focus preset”. Setting the zoom to the T side or
pointing the lens up or down will increase error.
• When you use Digital Zoom or AF illuminator, the AF range finder frame is disabled and appears in a
dotted line. In this case, the camera works to focus on the subjects at the center of the screen.
z If the subject is out of focus
When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF] or [Spot
AF], the camera may not focus on a subject at the edge of the frame.
In such cases, do as follows:
1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter
button halfway down to focus on the subject (AF lock).
As long as you do not press the shutter button fully down, you can retry the procedure as many
times as you want.
2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot,
and press the shutter button fully down.
0.5 m Focuses on the subject using a previously set distance to the
subject. (Focus preset)
• Use “Focus preset” when it is difficult to get sharp focus with
automatic focusing, such as when shooting a subject through a
net or window.
1.0 m
3.0 m
7.0 m
(unlimited distance)
96 P
AE/AF lock indicator
AF range finder frame