Dpof: adding a print order mark, Print: printing images using a printer, Adding a print order mark – Sony DSC-H3 User Manual
Page 59: Print): printing images using a printer
59
Us
in
g
the v
iew
ing fu
nc
tio
ns
Viewing menu
For details on the operation 1 page 39
To select and protect images
1
Press MENU in single-image mode or in index mode.
2
Select [Protect] with v/V, and select [Multiple Images] with b/B, then press z.
In single-image mode:
3
Select the image you want to protect with b/B, then press z.
The
is attached to the selected image.
4
Press b/B to display other images you want to protect, then press z.
5
Press MENU.
6
Select [OK] with v, then press z.
In index mode:
3
Select the image you want to protect with v/V/b/B, then press z.
The
is attached to the selected image.
4
To protect other images, repeat step 3.
5
To select all the images in a folder, select the folder selection bar with b, then press z.
The
is attached to the selected folder.
6
Press MENU.
7
Select [OK] with v, then press z.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by performing the
same procedure to protect it.
The
(Protect) indicator disappears.
•
Note that the formatting erases all the data stored on the recording media, even if the images
are protected, and these images cannot be restored.
•
It may take some time to protect an image.
Adds a print order mark (
) to the image you want to print.
Printing images shot with the camera.
See page 96.
: Adding a Print order mark
(This Image)
Attaches a DPOF mark to the image being selected now. Clears
the DPOF mark when the selected image has a DPOF mark.
(Multiple Images)
Selects images and attaches DPOF marks to them. Clears DPOF
marks already attached.
(Print): Printing images using a printer