Sony VPL-VW200 - Manual (Page 50)

50
Function Menu
The Function menu is used for changing the settings of the various functions of the
projector.
HDMI Control Selects the function whether to turn the HDMI Control function
effective, when the HDMI 1 INPUT and HDMI 2 INPUT
connectors are connected to a HDMI control compatible
equipment.
HDMI Control: When set to “On”, the HDMI Control function is
turned effective and the following settings can be assigned.
PJ
→HDMI Power Sync: When set to on “On”, the projector is
powered off while the HDMI control compatible equipment
connected to the projector is also powered off at the same time.
HDMI
→PJ Power Sync: When set to “On”, the HDMI control
compatible equipment connected to the projector is automatically
powered on or played back, etc., while the projector is also
powered on at the same time.
HDMI Device List: Lists all the HDMI control compatible
equipment connected to the HDMI 1 and HDMI 2 INPUT
connectors of the projector.
• When “Standby Mode” is set to “Low”, this item will not operate.
• To operate the connected equipment, be sure the equipment is
HDMI control compatible and assign the appropriate settings to
use the HDMI Control function.
For details, see “About the HDMI Control” (
1 page 59).
Auto Input Search Detects the input signal and displays the detected input signal
automatically when the INPUT button is pressed.
When set to “On”, the projector detects whether a Component,
HDMI 1, HDMI 2, Video, S-video or Input-A signal is input when
the input terminal with effective signals is automatically selected by
pressing INPUT. Set this to “Off” when you want to select an input
selector with no input signal, or you want to switch the setting
manually.
Notes