Sony DVP-NS755V - Manual (Page 17)

17
S
imp
le
S
ta
rt
Gu
id
e
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
To change the aspect ratio for the
connected TV
Depending on the disc and the TV type
(standard 4:3 screen TV or wide screen TV),
the image may not fit the TV screen.
If this happens, change the aspect ratio
(page 75).
When connecting to a TV that accepts
progressive 480p (525p) format signals
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
up your TV using pattern C on page 20, and
then run Quick Setup on page 29.
To change the color system (DVP-NS915V
only)
The color system of the player can be set to
NTSC or PAL. If the on-screen display does
not appear on the TV, change the color
system of the player to match the color
system of the connected TV (NTSC or PAL).
To change the color system, hold "/1 down
for a few seconds while pressing X on the
player.
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
1
2
AUDIO
L R
VIDEO
LINE OUT
S VIDEO OUT
1
2
Y P R SCAN SELECT P B
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
5.1CH OUTPUT
W O O F E R
L
R
FRONT REAR
C E N T E R
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
1
2
AUDIO
L R
VIDEO
LINE OUT
to LINE OUT
(VIDEO)1 or 2
to audio input
1 Audio/video
cord (supplied)
2 Power source
to video input
to LINE OUT
L/R (AUDIO)1
or 2
CD/DVD Player
TV
3 Power source
l : Signal flow
, continued