Sony DVP-NS755V - Manual (Page 75)

75
Set
tings
a
nd
Adj
u
st
m
e
nt
s
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select “SCREEN SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 73).
The default settings are underlined.
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
* 16:9 is the default setting for DVP-NS915V.
Note
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
◆ COLOR SYSTEM (VIDEO CD only)
(DVP-NS915V only)
Selects the color system when you play a
VIDEO CD.
Notes
• You cannot change the color system for DVDs.
• You can change the color system of this player
according to the connected TV. See page 17.
◆ SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a Super
Audio CD, CD, or DATA CD (MP3 audio)
for more than 15 minutes. The screen saver
will help prevent your display device from
becoming damaged (ghosting). Press H to
turn off the screen saver.
4:3
LETTER
BOX Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3
PAN SCAN Select this when you connect a
4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9 * Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND: 4:3 LETTER BOX
ON
JACKET PICTURE
COMPONENT OUT: INTERLACE
MODE: AUTO
4:3 PAN SCAN
4:3 LETTER BOX
16:9
AUTO Outputs the video signal in the
system of the VIDEO CD,
either PAL or NTSC. If your
TV is the DUAL system, select
AUTO.
PAL Changes the video signals of an
NTSC VIDEO CD and outputs
it in the PAL system.
NTSC Changes the video signals of a
PAL VIDEO CD and outputs it
in the NTSC system.
ON Turns on the screen saver.
OFF Turns off the screen saver.
, continued