Sony RCD-W2000ES - Manual (Page 27)

Recording/Editing
27
Turn on the indicator
OPT*
COAX*
ANALOG*
3
Press INPUT repeatedly to select the
input connector.
To record through
DIGITAL OPTICAL IN
DIGITAL COAXIAL IN
ANALOG IN
* If a disc is playing on DECK A, stop playback.
To record the disc in DECK A, turn off
“OPT”, “COAX”, and “ANALOG.”
4
Press REC z .
DECK B stands by for recording.
5
Adjust the recording level, if necessary.
For details, see “Adjusting the Recording
Level” on page 28.
6
Press N (or H on the remote).
7
Start playing the sound source you
want to record.
To pause recording
Press X. To resume recording, press the button
again or press N (or H on the remote).
Note
Whenever you pause recording, a new track number
is added. If you paused recording while recording, the
track number increases by one and recording
continues on the new track when recording is
resumed.
To stop recording
Press x.
“PMA Writing” appears while updating the
information of the disc before stopping the
recording.
To play from the beginning of the
disc after recording
1
Press x again while the unit is
stopped.
2
Press N (or H on the remote).
The unit starts playing from the first track.
Notes
• If you press REC z during recording, you can add
a track number (page 29). The track must be longer
than 4 seconds.
• When recording from more than one disc manually,
the silence between tracks may increase when
changing discs. To prevent this, use Synchro-
Recording.
• This unit uses the Serial Copy Management System,
which allows only first-generation digital copies to
be made of premastered software via the unit’s
digital input. Therefore you may not be able to
record a CD-R or CD-RW digitally through the
DIGITAL OPTICAL IN or DIGITAL COAXIAL
IN jack, depending on the content being recorded.
• Because of the restriction of the Serial Copy
Management System (SCMS), you may not be able
to make digital recordings. In this case, use analog
recording through the ANALOG IN jack when you
record from other units. Or use Synchro-Recording
when you record from DECK A. (The recording
mode is automatically changed to analog recording.)
• You cannot make manual recordings of MP3 files.
• While recording the source with “OPT”, “COAX”,
or “ANALOG” selected, you cannot play a disc on
DECK A.