Sony RCD-W2000ES - Manual (Page 8)

8
Playing a CD
This unit has two decks.
In this manual, the CD player section is just
called DECK A, and the CD-R and CD-RW
recording section is called DECK B.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A (the CD player
section), or to DECK B to operate DECK B
(the CD-R or CD-RW recording section).
1
Turn on your amplifier and adjust the
volume to the minimum.
2
Set your amplifier’s input selector to
select this unit.
3
Press POWER.
Basic Operations
The unit plays
All discs in the unit consecutively
in the order of the disc number.
Only one disc you have selected.
4
Press OPEN/CLOSE (or one of the DISC
1-5
A buttons for DECK A) and place a
disc on the inner circle of DECK A (or
B). Press OPEN/CLOSE (or
A ) again to
close the disc tray.
5
For DECK A, press PLAY MODE
repeatedly to select the Continuous
play mode.
When you
select
ALL DISCS
1 DISC/
ALBUM
6
Press N (or H on the remote).
The unit starts playing. Adjust the volume on
the amplifier.
To
Stop playback
Pause playing
Select the disc
(for DECK A)
Go to the next disc
(for DECK A) Z
Go to the next
track
Go to the beginning
of the current track
or the preceding
track
Remove the disc
*AMS: Automatic Music Sensor
Do the following:
Press x.
Press X. Press the button again or
press
N (or H on the remote)
to resume playing.
Press one of the DISC 1-5 buttons.
Press DISC SKIP on the remote.
Turn AMS* clockwise while the
ALBUM SELECT indicator in the
display is turned off (or press >
on the remote ).
Turn AMS counterclockwise while
the ALBUM SELECT indicator in
the display is turned off (or press
. on the remote).
Press OPEN/CLOSE (or A),
whichever contains the disc you
want to remove after stopping play.
With the label side up
POWER DISC 1-5 A OPEN/CLOSE
AMS N AMS
N PLAY MODE
x x
X
X
PLAY MODE
H
PLAY MODE
x X
DECK A/DECK B
./>
DISC SKIP