ArtDio IPF-3000 - Manual (Page 11)

Quick Installation Guide
IPF-3000
-7-
2. Dialing Method
In dialing phase, you could use【MUTE】to correct typos.
(1) Address book
z 『Main Menu』 =>『1.Address book』/『1.Search』(By default 【F4】 is programmed
to access address book).
z Pick the target number and press【REDIAL】to dial out.
(2) Call History
z Press【Call History】to choose desired call lists:Missed/Received/Dailed numbers.
z Traverse the list and pick up the target entry.
z Press 【REDIAL】to dial out.
Note: if you press 【Call History】 while its red LED is flashing (indicating there are
unviewed missed calls), it will enter the “Missed calls” list directly.
(3) ENUM Dialing
z Starting with【#】for ENUM dialing
z Dial the target number (6 digits at least), ending with a【#】to speed up dialing phase.
E.g.: to call “tel:+886-3-5295000”, please dial “#88635295000#”。
(4) Intra-Domain Dialing
z Enter the user part of the target AoR or dial alias number directly.
z The target SIP service domain could be circle by press 【Service Domain】.
z Press 【＃】to finishing dialing.
Intra-domain dialing is applicable if both party registered to the same SIP domain
(possibly to the same SIP proxy/registrar server) 。 E.g., if
sip:[email protected] wants to place a call to
sip:[email protected], he could just dial 【 3200 ＃ 】 when
“QuantierTech.com” has selected as target service domain.
(5) Contact Dialing
z Use 【*】for 『@』 and『 . 』
z Use 【**】 for 『 : 』if the target SIP agent does not listen on UDP port 5060.
z Press【＃】to finishing dialing
E.g. 1: to call sip: [email protected] , please dial “3200＊192＊168＊10＊200”.
E.g. 2: to call sip:[email protected]:5070, please dial
”3200＊192＊168＊10＊200**5070”.
(6) IP Dialing
z Use【*】for 『@』 and『 . 』
z Use【**】for “ : ” if the target SIP agent does not listen on UDP port 5060.
z Dial【#】to finish dialing.